Aqua Master Tools P50 Pro pH Temp Electrode
SKU: AMT1001
Aqua Master P50 Pro pH Temp Electrode
This replaceable electrode is suitable for the P50 Pro pH Temp meter . The electrode is IP67 waterproof when attached onto the meter. Please refer to our User Manual for instructions on how to replace the electrode or check out the how-to video.
Directions
- Properly unscrew the sealing ring in the lower part of the meter.
- Remove the defected/old electrode by gently pulling it.
- Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
- Check that the rubber seal is properly placed.
- Tightly tighten the sealing ring.
- Calibrate the meter as described in this manual.
- The meter is now ready for use.
Videos
P50 - Replace the electrode
| EACH | CASE | MASTER CASE | PALLET | |
|---|---|---|---|---|
| UPC | ||||
| Qty | 1 | 50 | 0 | 0 |
| Weight (lbs) | 0 | 3.75 | 0 | 0 |
| Width (in) | 1.18 | 10.24 | 0 | 0 |
| Height (in) | 1.18 | 7.87 | 0 | 0 |
| Length (in) | 3.58 | 6.3 | 0 | 0 |
Subscribe to our Newsletter
Stay up to date with our newest products and deals!